TALVITARJOUKSET
 - Record Power Winter Promo on alkanut ! KATSO TARJOUKSET

LUE LISÄÄ
Kirjaudu sisään
Toimitusmaa

V-ura jyrsinterä 90° HW S=6 D=9,5X12,7

V-ura jyrsinterä 90° HW S=6 D=9,5X12,7
V-ura jyrsinterä 90° HW S=6 D=9,5X12,7
V-ura jyrsinterä 90° HW S=6 D=9,5X12,7
V-ura jyrsinterä 90° HW S=6 D=9,5X12,7
V-ura jyrsinterä 90° HW S=6 D=9,5X12,7
V-ura jyrsinterä 90° HW S=6 D=9,5X12,7
V-ura jyrsinterä 90° HW S=6 D=9,5X12,7
Item Code D I A L S
715.001.11 18 7,4 90° 60 6
715.002.11 18 3,3 135° 60 6
815.001.11 18 7,4 90° 60 6,35
815.002.11 18 3,3 135° 60 6,35
915.001.11 18 7,4 90° 60 8
915.002.11 18 3,3 135° 60

8

Tuotemerkki:    CMT

A = Kulma:    90

D = Halkaisija / Koko:    9,5

B / I = Leikon pituus:    12,7

L = Pituus:    60

S = Kannan halkaisija:    6

Laakeri:    Ei

0
0 arvostelua
0%
asiakkaista suosittelee tätä tuotetta


V-ura jyrsinterä 90° HW S=6 D=9,5X12,7

€ 34,99
Veroton: € 27.88
Numero: 715.095.11
Toimitusaika: 10-15 Arkipäivää
Vapaana valmistajan varastossa
Saat 6.998 alennuspistettä
Lisää toivelistalle
LEASING
Kuukausierä:2.64
Leasingaika:
Loppulunastushinta:70
Vain yrityksille (vaatii Y-tunnuksen).

Laskelmat perustuu Grenke-leasing hinnastoon, joka ei sisällä vakuutusta. Vakuutus on pakollinen ja asiakas voi hankkia joko oman vakuutuksen tai ottaa sen samalla sopimuksella. Leasing-rahoitus myönnetään vain yrityksille, joilla voimassa oleva Y-tunnus.

Leasingaika 12-72 kk.

Leasinghinnat alv 0.

Mahdollisuus lunastaa lopussa omaksi loppulunastushinnalla, joka näkyy tuotteen kohdalla ja yhteenvedossa. Loppulunastushinta on minimissään 70€ alv 0.

Lähetettyäsi tilauksen leasing rahoituksella, saat 1-2 päivän sisällä sähköpostissa sopimukset sähköisesti allekirjoitettavaksi.

Mikäli haluat käyttää omaa vakuutusta, leasing-yhtiö tarvitsee vakuutustodistuksen, josta käy ilmi seuraavat asiat:

  • Yrityksen nimi
  • Vakuutussopimusnumero
  • Tieto että sopimuksella olevat laitteet on vakuutettu, tai tieto siitä että yrityksellä on omaisuusvakuutus
  • Vakuutusyhtiön nimi/logo
  • Vakuutus on voimassa / vakuutustodistuksen päivämäärä
  • Vakuutusmäärä kattaa sopimuksen arvon (kk summa x aika)
HWRHz2bianco

V-GROOVING BITS

7/8/915.01-02

ALUCOBOND® plus composite panels can be shaped using a very simple processing method. The technique, called the routing and folding method, enables a fabricator to produce shapes of various kinds and sizes. A V-shaped groove is routed on the reverse side of the ALUCOBOND® plus composite panel using a “V” groove router bit. A thin layer of the core material should be left at the base of the groove, i.e. on the inside of the outer cover sheet. The untouched outer cover sheet can now be bent manually, giving an exact and clean folding line which follows the routed groove. The outer radius of the folded edge depends on the shape of the groove and its depth. We recommend that the routing be done using a CNC machining center, a portable sheet milling machine or a hand router. The routing and folding method can be used for ALUCOBOND® plus composite panels with all available standard surface finishes.

THE ADVANTAGES OF THIS UNIQUE TECHNIQUE ARE:
-Low investment cost.
-Simple fabrication technique.
-Folding can be done on site, saving transportation cost.
-Low-cost fabrication of shaped components, wall cladding, roof edgings, column cladding, flashings, etc.
-Flexibility in creating shapes.
-Very economical.
-Shapes are not limited by machine capacity.


Nettiverstas - Instagram
Nettiverstas - YouTube
Loading...