TALVITARJOUKSET - Record Power Winter Promo on alkanut ! KATSO TARJOUKSET
The minimum quantity lubrication MIKROMAX MVD works according to the Venturi principle: Compressed air supplied atomizes thin lubricant into the cooling mist in the nozzle. The quantity of compressed air and coolant can be fine-tuned with needle valves independently of the respective requirement. The system works with an air pressure of 0.3 to 1.5 bar, at higher pressures up to 6 bar the coolant is atomized accordingly. One advantage of the system is the cooling of the tool using cooling mist and compressed air.
Additional advantages:
The coolant is switched on and off manually using a ball valve.
The amount of compressed air and coolant can be adjusted and fixed sensitively and independently of one another by needle valves. A laborious adjustment by turning the nozzle head like in other models is no longer necessary.
No dripping after the coolant valve has been locked.
No check valve that hinders the Venturi effect.
The container for coolant can also be placed above the nozzle. The ball valve prevents the container from running empty.
Despite the coolant tank connected, this system can also be used as an air nozzle to blow out chips or simple air cooling only by opening the air valve.
The air supply can also be switched off separately from the needle valve using the enclosed manual valve, which can be installed anywhere on the machine. This means that the needle valve for the air does not have to be readjusted every time it is switched on, the application becomes easier.
The system is delivered ready for installation and consists of:
Nozzle with flexible hose
Mixture control unit with ball valve for coolant
Approximately 2 m suction hose with suction filter
Approximately 2 m pressure hose with threaded connection in G1/8"
Manual valve for air for mounting on the machine
Tuote lisätty ostoskoriin! Siirry tästä ostoskoriin
Tuote lisätty ostoskoriin! Siirry tästä ostoskoriin
Laskelmat perustuu Grenke-leasing hinnastoon, joka ei sisällä vakuutusta. Vakuutus on pakollinen ja asiakas voi hankkia joko oman vakuutuksen tai ottaa sen samalla sopimuksella. Leasing-rahoitus myönnetään vain yrityksille, joilla voimassa oleva Y-tunnus.
Leasingaika 12-72 kk.
Leasinghinnat alv 0.
Mahdollisuus lunastaa lopussa omaksi loppulunastushinnalla, joka näkyy tuotteen kohdalla ja yhteenvedossa. Loppulunastushinta on minimissään 70€ alv 0.
Lähetettyäsi tilauksen leasing rahoituksella, saat 1-2 päivän sisällä sähköpostissa sopimukset sähköisesti allekirjoitettavaksi.
Mikäli haluat käyttää omaa vakuutusta, leasing-yhtiö tarvitsee vakuutustodistuksen, josta käy ilmi seuraavat asiat:
100% Suomalainen verkkokauppa
Asiantunteva asiakaspalvelu
Nopeat toimitukset
Suuri valikoima suoraan varastosta
Ei välikäsiä - säästä hinnassa
Saat tietoa tuotteiden käytöstä, esittelyvideoista ja viimeisistä uutuuksista ja tarjouksistamme.
Tilaa alta ja saat myös alennupisteitä.
Hallitie 16 | Rovaniemi | Finland
045 4903310 (klo 10-15)
tavallinen matkapuhelinmaksu - huom. käytä vastaajaa, soitamme takaisin
asiakaspalvelu@nettiverstas.fi
Asiakaspalvelu ja myynti:
Ma - Pe | 10.00 - 15.00
Verkkokauppamme on auki 24/7