Login
Shipping Country
Super CLEARANCE CAMPAIGN - Selected tools and accessories with Super Special prices! - CHECK HERE
READ MORE
Login
SA-OFL3.0, SU-06490703
| Input power | 1,530 W |
| Speed | infinitely variable 3,500–30,000 rpm |
| Torque | 0.45 Nm |
| Clamping neck | Ø 43 mm, steel |
| Collet included | 8 mm |
| Weight | 2.85 kg |
The OFL3.0 tilts -5° to +50° and locks at the classic angles of 22.5°, 30°, 45° and 90°. The manufacturer highlights the consequence: chamfers, tapers, grooves and mitre cuts are produced with a single slot cutter by tilting it, where otherwise each angle would need its own profile bit. The pivot also costs no routing depth.
Height is set from above with the rotary handle; angle locking and centring in the slotted hole are done with levers underneath. Bit changes are easy because the spindle and collet chuck look upwards.
| Pivot range | -5° to +50°, snap-in points 22.5° | 30° | 45° | 90° |
| Insert plate | 306 × 229 × 9 mm, corner radius 6 mm |
| Height adjustment per rotation | 4 mm |
| Max. adjustment travel | 74 mm |
| Height, fully extended | 240 mm |
| Max. router bit diameter | Ø 55 mm |
| Fine adjustment | to 1/10 mm |
| Motor clamping neck | Ø 43 mm |
| Weight | approx. 5 kg |
| Made in | Germany |
A router motor mounted under the table is a precise machine but awkward to set: the cutter height has to be found from below, and changing a bit means releasing the machine. A router lift moves both above the table. Height is set through a threaded spindle, which makes the setting repeatable and stops it drifting during the cut.
The lift takes a router motor with a Ø 43 mm clamping neck. Directly compatible and approved by the manufacturer:
The Mafell FM1650PV-LO is not compatible. If your motor is not listed, check the clamping neck tolerance stated by its manufacturer before ordering.
The insert plate is 306 × 229 mm, Sauter's standard outline — so the lift fits almost every router table and is interchangeable with earlier insert plates. The plate is levelled with adjusting screws. The manufacturer offers a mounting kit SA-99600005 (4 corner plates, 4 countersunk screws, 12 wood screws) and a sheet-steel levelling frame SA-99600006 for permanent levelling.
Brand: Sauter
You'll get 230.99 rewardpoints
The calculations are based on the Grenke leasing price list, which does not include insurance. Insurance is compulsory and the customer can either purchase their own insurance or take it out with the same contract. Leasing financing is only granted to companies with a valid business ID.
Lease period 12-72 months.
Leasing prices VAT 0.
Option to redeem at the end for your own final delivery price, which will be shown under the product and in the summary. The minimum final delivery price is 70€ VAT 0.
After placing an order with leasing financing, you will receive within 1-2 days by email the contracts for electronic signature.
If you wish to use your own insurance, the leasing company will require a certificate of insurance showing the following:
The pivoting OFL3.0 router lift and Suhner's UAK 30 RF router motor. Sauter's original combination, both parts in industrial quality: the same set works as well in a home workshop as in a company. Suhner is on Sauter's own compatibility list, and its steel Ø 43 mm clamping neck goes straight into the lift.
The motor's input power is 1,530 W and its speed is infinitely variable from 3,500 to 30,000 rpm. Both are made in Germany.
100% Trustworthy online store with history
Expert customer service
Fast deliveries
Large selection directly from stock
No middlemen - save on the price
Suomeksi
På Svenska
add to cart
Add to wish list
