Login
Shipping Country
Super CLEARANCE CAMPAIGN - Selected tools and accessories with Super Special prices! - CHECK HERE
READ MORE
Login
Blue diode laser: wood, acrylic, leather, paper, corrugated cardboard, black anodised aluminium, thin metal, stone and bamboo products. Infrared module: metals (stainless steel, copper, aluminium, precious metals), anodised aluminium and certain plastics.
These extend the machine but are not included with this product:
Below, each technique and what it takes on this machine — and honestly also when another model is the better choice. Click to expand.
Standard on this machine
The laser cuts and engraves organic sheet materials: wood, plywood, MDF, card, leather and coloured acrylic.
With another model
Clear acrylic does not absorb a diode laser's blue light — only a CO2 laser cuts it, and it is also fastest on thick wood.
Clear acrylic is only cut by a CO2 laser: the P2S (Class I for schools), the P3 with the largest area — and the X1 if the same machine should also do galvo engraving.
With another model
In a galvo laser, mirrors steer the beam several times faster than gantry machines — marking and batch jobs finish in minutes.
the F2 Ultra is the best for galvo engraving (60 W MOPA + 40 W diode); the F1 Ultra is a more affordable fibre+diode combination, also available as Class 1; the F2 is the cheapest for fast small-part marking; the X1 fits when CO2 cutting is also needed.
Requires: M2 3 W infrared module (1064 nm)
Bare metal needs a fibre laser or infrared source — blue diode and CO2 leave no permanent mark without aids.
With another model
Colours on stainless steel only come from a MOPA laser whose pulse duration and frequency are adjustable.
Colour engraving on stainless is done by the F2 Ultra (a ready 60 W MOPA machine) or the X1 with the 60 W MOPA source.
With another model
A UV laser is a cold process: plastics, glass and electronics are marked without heat damage. Sub-surface glass engraving is done by the F2 Ultra UV.
Sub-surface glass engraving is done by the F2 Ultra UV; for UV marking of sensitive surfaces the X1 with the 5 W UV source also works.
Requires: RA3 Lite rotary
A rotary engraves mugs, bottles and other cylinders; a conveyor or slide extends the machine to long materials. Note: pass-through openings change the enclosed machine's system classification — conveyor use requires the safety arrangements in the manufacturer's instructions.
Requires: M2 CMYK inkjet module
Colour printing is its own world: CMYK inkjet brings the colours, and print & cut and DTF textile printing are done on machines built for them.
Brand: xTool
You'll get 135.79 rewardpoints
The calculations are based on the Grenke leasing price list, which does not include insurance. Insurance is compulsory and the customer can either purchase their own insurance or take it out with the same contract. Leasing financing is only granted to companies with a valid business ID.
Lease period 12-72 months.
Leasing prices VAT 0.
Option to redeem at the end for your own final delivery price, which will be shown under the product and in the summary. The minimum final delivery price is 70€ VAT 0.
After placing an order with leasing financing, you will receive within 1-2 days by email the contracts for electronic signature.
If you wish to use your own insurance, the leasing company will require a certificate of insurance showing the following:
Customer service in English and Finnish from Nettiverstas.
The xTool M2 is a desktop laser that prints, cuts and engraves. Swap the module and the same machine handles full-colour printing, laser cutting and metal marking.
Swap the module and swap the process: a 10 or 20 W blue diode laser cuts and engraves, a 3 W infrared module marks metal and the CMYK inkjet module prints in full colour.
The distant-view camera shows the whole work area and the close-view camera aligns the detail. You see where the job lands on the material before the machine starts.
The enclosed design makes this a Class 1 laser device, so it can be used without separate safety goggles.
The machine engraves cylindrical items from 0 to 100 mm without a riser base.
xTool Studio and its ready-made templates get you started without a CAD background.
100% Trustworthy online store with history
Expert customer service
Fast deliveries
Large selection directly from stock
No middlemen - save on the price
Suomeksi
På Svenska
add to cart
