Router Table 816x610 All Inclusive

With the Router Table system, every workshop is well equipped.

All our Router Table combinations consist of carefully selected components, for which we have paid particular attention to high quality, popularity and reliability. For every requirement and every workshop we offer the right Router Table solution.

The following components are included in this set:

• Router table HPL 1.0, size: 816 x 610 x 28 mm.
• table base UG1.0 for Router Table, height: 850 - 900 mm.
• Kreg precision fence PRS1015.
• Router lift OFL2.0-AD43 with 43 mm fixing for router motors.
• Router motor UAL 23 RF from Suhner, 1800W, electronically adjustable: 2500 - 23000 rpm.
• Safety switches for Router Tablee, zero voltage switches up to 3000 W.
• Pressure combs from Milescraft, double set for small and normal sized workpieces.
• push stick, made of robust plastic, length: 420 mm.

==========================================================================

Technical data for table top:

• Plate dimensions: 816 x 610 x 28 mm
• Dimensions of the cut-out: 307 x 230 x 9 mm
• Length of the profile rails for rip fence: 250 mm
• Material Surface: HPL coating light grey
• Edges of blue plastic.
• Weight: 7,6 kg

==========================================================================

Advantages and characteristics for table base:

• Lightweight and yet very stable
• Versatilely expandable
• Rubberised feet for a firm stand, can be converted to castors for more mobility in the workshop
• Various plates can be mounted
• Recessed grooves on four sides for M8 screws, T-nuts and clamps from Bessey and Festool
• Extension possibilities by adding further profile struts for substructure constructions and extensions

Technical data for table base:

• Size: 816 x 610 x 880 mm
• Profile: 45 x 45 mm
• grooved on all four sides
• Very high load capacity
• Anodized surface for better gliding properties and a more attractive appearance

==========================================================================

Advantages for kreg router table fence:

• Robust aluminium fence for precision and stability on any router table.
• Innovative, self-aligning L-construction.
• Practical lateral guide rail for easy adjustment of the fence
• Micro-fine adjustment of the adjustment rail through innovative adjustment dial
• For mounting on tables with plate thicknesses from 19-38 mm.
• An integrated extraction module ensures efficient extraction. It is located directly at the cutter opening and allows the chips to be removed directly.
• Stop jaws are horizontally adjustable up to a stop length of 1017 mm.

Measurements for kreg router table fence:

• Total length of the fence: 914 mm
• Length of the stop jaws: 457 mm each
• Total length with extended stop jaws: 1017 mm
• Height of the stop jaws: 61 mm
• Total height of the fence: 85 mm
• Extraction connection ID/AD: 58/62 mm

==========================================================================

Router Lift OFL2.0-AD43 for Router motors

• Dimension of insert plate: 306 x 229 x 9 mm
• Corner radius of insert plate: 6 mm
• Height adjustment travel/rotation: 4 mm
• Max. Adjustment travel: 100 mm
• Height milling lift (max. extended): 240mm
• Max. Cutter diameter: 55 mm
• Weight: approx. 4,81 kg
  • Clamping neck Ø / tolerances of the milling motor: 43 mm / -0,135 + 0,015
  • Required clamping height of the milling motor: 20 mm
  • Max. Weight of the milling motor: 5 kg

Greatest advantage of the router lift for router motors:

• No more loss of routing depth!
• Easiest cutter change thanks to the spindle and collet chuck still looking out from above!

Further advantages and characteristics:

• Quality from Germany - first-class, solid construction. Construction made of high-quality aluminium and steel.
• Height fine adjustment to 1/10mm - Height fine adjustment can be set extremely accurately, with exact scaling and effective spindle lock, conveniently operated via Hexagon socket screw.
• Smooth-running spindle columns - Enable infinitely variable and exact fine height adjustment.
• Fits in (almost) any Router Table- Robust, anodised aluminium insert plate in the familiar outline dimensions of 306 x 229 mm and thus interchangeable with our previous Insertion plates (e.g. FO-RTS2, SA-ELP... or T-RTI-PLATE) --> no further Routingones necessary.
• Compatible with common Routing- The OFL2.0-AD43 is compatible with a wide range of commercially available milling motors with 43 mm Euro-neck. All models can be found below.
• Mounting made easy - Simple mounting of the milling cutter to the mounting adapter of the OFL2.0-AD43 (drilling pattern in operating instructions).
• Routing also without rip fence - 2 drill holes for the free-milling fence pin allow you to freely cut e.g. round workpieces without rip fence (see optional, separate accessories - not in Delivery Includes).
• Absolutely flat - Simple levelling of the OFL2.0-AD43 by levelling screws in the insert plate. Optionally a frame for a permanent leveling can be purchased will be.
• No own drillings necessary - mounting holes (countersunk head) for quick Router Tableinstallation are already pre-drilled.
• Laser scaling - millimetre scaling on the surface for exact alignment of the rip fence

Special feature compared to OFL1.0:

• Additional recessed grip for easy changing of the reduction plates.
• Magnetism for mounting additional accessories is distributed over the entire reduction plate.

 Directly compatible and approved router motors

• Cress: 530 FM, 800 FME, 1050 FME
• MAFELL: FM 1000
• SUHNER: UAC 30 RF, UAD 25 RF, UAK 30 RF, UAL 23 RF

Delivery Includes

• 1x Router Lift OFL2.0
• 1x mounting adapter ADAP43-OFL (already installed)
• 2x reduction plates Ø 32 and 68 mm
• 1x hexagon screwdriver 5x150 mm
• 4x fixing screws M6x50, washers and nuts
• 18x mounting screws (various sizes)
• 8x levelling screws M5x8
• 1x instruction manual (German)

==========================================================================

Technical data:

• Input power: 1.800 Watt
• Speed infinitely variable: 2,500 - 23,000 rpm
• Torque: 0.73 Nm
• Voltage: 230 Volt / 50/60 Hz
• Collet chuck: 8 mm
  --> Further collets in 6mm, 10mm, 12mm and imperial sizes available separately.
• Weight: 4,8 kg

Other features:

• Protection-insulated universal motor with extremely high efficiency - unrivalled in robustness and effectiveness.
• Extremely powerful, enormously powerful motor with large power reserve and compact design.
• Very stable clamping neck Ø 43 mm (standard) in steel design - for installation in drill rigs, CNC and routing fixtures.
• Precision double ball bearings - for powerful and highly accurate routing.
• Tool holder with classic collets with clamping nut for optimum guidance of the tool and precise concentricity.
• Exact concentricity even under the heaviest loads - guarantees results and safety.
• Ideally suited for heavy duty operations in window construction, in the furniture industry, for dowel and profile milling, for edge processing, etc.
• Design incl. tacho control electronics for constant working speeds for even cutting speeds, very quiet running, anti-lock protection, soft start for jerk-free Start-up, fast clocking and PTC thermal monitoring.

==========================================================================

Safety switch (No voltage return) for Router Tables

Protects against automatic restart in case of power interruption

Features:

• the safety switch consists of: Earthing contact socket, earthing contact plug, on-off button and zero-voltage coil 230 V
• the switch is ready for connection and easy to install.

Note: Most hand routers purchased after Jan 2022 are fitted with auromatic restart protection as standard, therefore making the use with an NVR switch impractable as the router must be turned or again from under the router table after every use. Check the manufacturers instructions to see if your router is compatable. Router motors are not affect by this rule.

Technical data

• Protection class: IP54
• Operating current IE: 13.5 A/250 V
• Universal control voltage UC: 230 V/50 Hz
• Utilization category AC3: 3 kW
• Only available with a standerd EU 2-pin socket

==========================================================================

Milescraft D/T FeatherBoard

Fits perfectly in sauter profile rails

Double pressure comb design for use with milling or sawing tables or even band saws. Safe and firm guidance for large workpieces or in use for smaller workpieces in the disassembled condition - the perfect 2-in-1 package!

Advantages and characteristics:

• Fits perfectly into the sauter profile rails - T-slot bolt screws are included
• Safety: minimizes the kick-back effect when Routing
• Double safety: for the machining of small and normal sized workpieces, the intermediate piece is removed and one becomes two pressure combs
• Quick and easy adjustment
• Including 2 guide rails in different widths for most commercially available milling and sawing tables: castings for 3/4" rail (approx. 19 x 10 mm cross-section) and 5/8" rail (approx. 16 x 10 mm cross-section). Without cast parts, the T-slot bolts can be used directly in Sauter profile rails.
• Including intermediate piece for the safe machining of larger workpieces
• Double safety: for the machining of small and normal sized workpieces, the intermediate piece is removed and one becomes two pressure combs
• Ergonomic rotary handles for quick and safe fastening
• Curved shape for maximum grip

Technical data::

• Total length: approx. 200 mm
• Adjustment range: 130 mm
• 3/4" guide rail: approx. 19 x 10 in cross-section
• 5/8" guide rail: approx. 16 x 10 in cross-section

==========================================================================

For your safety and for a stable guidance of the workpiece at the milling or sawing table, this very useful sauter push stick is recommended.
Length of the push stick made of stable plastic: 420 mm