BILLIG FRAKT till Sverige - från 90 SEK

LÄS MER
Leverans land

GlassCast 10 Clear Epoxy Coating Resin 5Kg

GlassCast 10 Clear Epoxy Coating Resin 5Kg

GlassCast® 10 is a water-clear, UV resistant epoxy clear casting resin suitable for castings and deep coatings up to 10mm in thickness. It is recommended for clear jewellery resin casting, 3D resin art, encapsulation and filling holes and gaps in wood (up to 10mm) and can be cast in multiple layers to an unlimited depth*. Open surface will require polishing.

Suggested Uses

Glass Cast 10 is extremely easy-to-use. It is low odour, easy to mix and measure and does not require vacuum degassing; in fact this amazing resin will drive tiny air bubbles out of the resin during the cure resulting in a perfectly clear, glass-like casting.

All Glass Cast resins have been designed to have exceptional behaviour in contact with wood making them the perfect choice for combining with a wide range of woods including products such as half-wood jewellery (like wood resin rings), paperweights, walking stick handles and furniture pieces.

Pigments and Tints

To create stunning translucent colours (like stained glass) just add a few drops of our resin tinting pigments. GlassCast can also be enhanced with metal powders, glitters and glow powders to achieve a huge range of decorative effects. It is the perfect clear resin for crafts of all kinds.

Our Glass Cast range of resins are compatible with many pigments and colouring powders on the market today. This includes epoxy compatible pigment pastes, various pigment powders and translucent tinting pigments. If the pigment manufacturer is not sure if the pigment is epoxy compatible then a small test should give you the answer you need. We stock a range of pigments that have all been tested and work great with all of our Glass Cast resins.

Suggested Uses

  • Clear or tinted resin jewellery
  • Resin & wood jewellery
  • Pen blanks
  • 3D resin art
  • Thick counter-tops (with embedded objects)
  • Water effects for models / scenarios

Shelf Life

Shelf Life is 12 months from date manufacture. GlassCast should be stored in its original container and out of direct sunlight. It is recommended that the storage temperature should be between 15ºC and 25ºC. Ideally, containers should be opened only immediately prior to use. KEEP THE PACKING TIGHTLY SEALED WHEN NOT IN USE. When stored correctly, the resin and hardener will have a shelf-life of 12 months. Although it may be possible to use the resin and hardener after a longer period, a deterioration in the performance of the resin will occur.

How to Use

GlassCast 10 should always be mixed, poured and cured at a constant room temperature of around 20°C. Resin and hardener should be mixed 2 parts resin to 1 part hardener by volume.

For castings, GlassCast 10 can be poured into common mould materials such as silicone**, polyethylene and polypropylene without the need for any release agent. For thick coatings GlassCast 10 can be poured directly onto dry surfaces such as metal, concrete and wood following a light ‘keying’ of the material.

*Additional layer should be poured when the previous layer reaches the B-stage of the cure. If the resin has fully cured the surface on the previous layer must be keyed to ensure a strong mechanical bond.

**Unlike most water clear resins, GlassCast can be cast into Condensation/tin cure RTV silicone rubber moulds without any problems.

Toimitetaan ainoastaan matkahuollon kautta.

Tillverkare:    GlassCast

0
0 Recensioner
0%
av kunder rekommenderar denna produkt


GlassCast 10 Clear Epoxy Coating Resin 5Kg

€ 199,90
Exkl. moms: € 161.21
Nummer: 18702
Beräknad leverans: 1-3 dagar
Du kommer få 39.98 rabattpoäng
Lägg på önskelistan
LEASING
Månadsbetalning:15.1
Leasingtid:
Slutligt anskaffningspris:70
Endast för företag. Momsregistreringsnummer krävs.

Beräkningarna är baserade på Grenkes leasingprislista, som inte inkluderar försäkring. Försäkring är obligatorisk och kunden kan antingen köpa sin egen försäkring eller ta ut den med samma kontrakt. Leasingfinansiering beviljas endast till företag med giltigt FO-nummer.

Leasingperiod 12-72 månader.

Leasingpriser är moms 0.

Möjlighet att lösa in i slutet för ditt eget slutliga leveranspris, vilket kommer att visas under produkten och i sammanfattningen. Det lägsta slutliga leveranspriset är 70 € moms 0.

Efter att du har gjort en beställning med leasingfinansiering får du inom 1-2 dagar via e-post kontrakten för elektronisk signatur.

Om du vill använda din egen försäkring kommer leasingbolaget att kräva ett försäkringsintyg som visar följande:

  • Företagets namn
  • Försäkringsbrevets nummer
  • Information om att den utrustning som omfattas av avtalet är försäkrad, eller information om att företaget har en egendomsförsäkring
  • Försäkringsbolagets namn/logotyp
  • Försäkringen är i kraft/datum för försäkringsbeviset
  • Försäkringsbeloppet täcker värdet på avtalet (månadsbelopp x tid)
.
AVBETALNING




Nettiverstas - Instagram
Nettiverstas - YouTube
Loading...